Back to the main page Back to category Flashlights
watch details
ThruNite TN32 UT Cool White 1150LM Cree XP-L HI LED Taschenlampen Flashlight
Estimated price for orientation: 159 $
Category: Flashlights
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Marke: ThruNite Herstellernummer: nicht zutreffend EAN: Nicht zutreffend
ThruNite TN32 UT Cool White 1150LM 1043m Cree XP-L HI LED Taschenlampen Flashlight by 3x18650 Battery (NOT Included)
7Modes from Firefly to Strobe
Designed for flasholics only, ThruNite TN32 UT LED Thrower Flashlight adopts an advanced CREE XPL HI LED to give max output up to 1150 lumens
and features smooth reflector to give perfect beam and throw.
The TN32 UT also has a streamline design and very beautiful body, with the bass circuit warehouse to provide better heat dissipation performance.
Moreover, it weighs only 653 grams and is very convenient to carry on, making it ideal for tactical, searching and rescue purposes.
Features and Specifications
Adopts advanced CREE XP-L HI LED with a lifespan of 20+ years of run time.
Bass circuit warehouse provides better heat dissipation performance.
Runs on: 3 x 18650 batteries (NOT included).
Max output: 1150 lumens.
Max beam distance: 1043 meters.
Peak beam intensity: 272000 cd
Working voltage: DC 8V-13V.
Output & Run time (Tested with 3 x 18650 3400mAh)
-Firefly mode: 0.4lumens (40days)
-Low:11lumens (13days)
-Medium: 178lumens (21hrs)
-High:438lumens (7.6hrs)
-738lumens (3.8hrs), 1150lumens (2hrs), Strobe (1150lumens /6hrs).
Aircraft-grade aluminum body with Premium Type III hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with anti-reflective coating.
Smooth reflector gives perfect beam and throw.
Reverse polarity protection design to well prevent from improper battery installation.
Waterproof: IPX-8 Standard (2M).
Impact resistance: 1.5M.
Dimension: 201mm(length)*79mm(bezel diameter).
Weight: 653g (without batteries).
Accessories (included): 1 x Holster, 1 x Lanyard, 1 x O-ring, 1 x User Manual.
(Kindly note: The package is without any batteries)
Operation:
Turn ON/OFF
Click the tail switch to turn on/off.
Tactical Lighting/Momentary On
Half press the tail cap button, the flashlight will turn on temporarily; release the button at the tail cap, the light will turn off.
Change Modes
When the light turned on, rotating the Control Ring to cycle through six brightness levels, stand-by and strobe mode smoothly.
Cautions:
Use of Battery
Battery: uses 3 *18650 batteries. (NOT Included)
Battery Replacement: to ensure performance of the flashlight and for your own safety, please use high-quality batteries with an integrated protected circuit and make sure to insert the batteries correctly with the negative (-) polarities connecting the springs in the battery carrier.
Please take out the batteries if you will not use your light for an extended period of time to avoid battery leakage, which may damage the flashlight components and parts.
Use of O-rings (if available)
A right amount of lubricant will be used on the O-rings before shipping to ensure the light can be assembled smoothly and protect from oxidizing the O-rings.
If necessary, please replace the spare O-ring attached in the package.
Max Output
Please mind the heat. When the light runs a long time, there is heat coming from the battery discharge, drive circuit and LED. The flashlight head will be very hot.
DO NOT use the light at Max mode for a long time. To protect the battery, drive circuit and LED, we do not recommend you run the light at Max mode more than ten minutes. Kindly Notes: Payment
1. We ONLY accept PayPal payments .
2. Payments must be received within 7 days from the auction end date.
3. We are not responsible for any custom duty or import tax.Shipping
1. All items will be shipped within 48 business hours upon receipt of payment (except weekends and holidays).
(If Payments are received on weekends or holidays, goods will be shipped on the following business day.
Please understand that holidays and weekends are not regarded as business days.)
2. All items will be shipped by E-Packet or Registered Airmail with tracking number.
3. Buyer confirms (offers) address & Phone number after order item.
1> Please write down the real address.
2> Please write down the right post code and city name.
3> Please do not breviate street name.
4> because of the abbreviated address, the post man can not dispatch the item and return the parcel, the buyers will be responsible for any loss.Contact Us
If you have any questions, please contact us via the eBay Message System before leaving any negative feedback or open any dispute on PayPal.
To e-mail us, please click the 'Ask a question.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Marke: | ThruNite |
| Herstellernummer: | nicht zutreffend | EAN: | Nicht zutreffend |
ThruNite TN32 UT Cool White 1150LM 1043m Cree XP-L HI LED Taschenlampen Flashlight by 3x18650 Battery (NOT Included)
7Modes from Firefly to Strobe
Designed for flasholics only, ThruNite TN32 UT LED Thrower Flashlight adopts an advanced CREE XPL HI LED to give max output up to 1150 lumens
and features smooth reflector to give perfect beam and throw.
The TN32 UT also has a streamline design and very beautiful body, with the bass circuit warehouse to provide better heat dissipation performance.
Moreover, it weighs only 653 grams and is very convenient to carry on, making it ideal for tactical, searching and rescue purposes.
Features and Specifications
Adopts advanced CREE XP-L HI LED with a lifespan of 20+ years of run time.
Bass circuit warehouse provides better heat dissipation performance.
Runs on: 3 x 18650 batteries (NOT included).
Max output: 1150 lumens.
Max beam distance: 1043 meters.
Peak beam intensity: 272000 cd
Working voltage: DC 8V-13V.
Output & Run time (Tested with 3 x 18650 3400mAh)
-Firefly mode: 0.4lumens (40days)
-Low:11lumens (13days)
-Medium: 178lumens (21hrs)
-High:438lumens (7.6hrs)
-738lumens (3.8hrs), 1150lumens (2hrs), Strobe (1150lumens /6hrs).
Aircraft-grade aluminum body with Premium Type III hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with anti-reflective coating.
Smooth reflector gives perfect beam and throw.
Reverse polarity protection design to well prevent from improper battery installation.
Waterproof: IPX-8 Standard (2M).
Impact resistance: 1.5M.
Dimension: 201mm(length)*79mm(bezel diameter).
Weight: 653g (without batteries).
Accessories (included): 1 x Holster, 1 x Lanyard, 1 x O-ring, 1 x User Manual.
(Kindly note: The package is without any batteries)
Operation:
Turn ON/OFF
Click the tail switch to turn on/off.
Tactical Lighting/Momentary On
Half press the tail cap button, the flashlight will turn on temporarily; release the button at the tail cap, the light will turn off.
Change Modes
When the light turned on, rotating the Control Ring to cycle through six brightness levels, stand-by and strobe mode smoothly.
Cautions:
Use of Battery
Battery: uses 3 *18650 batteries. (NOT Included)
Battery Replacement: to ensure performance of the flashlight and for your own safety, please use high-quality batteries with an integrated protected circuit and make sure to insert the batteries correctly with the negative (-) polarities connecting the springs in the battery carrier.
Please take out the batteries if you will not use your light for an extended period of time to avoid battery leakage, which may damage the flashlight components and parts.
Use of O-rings (if available)
A right amount of lubricant will be used on the O-rings before shipping to ensure the light can be assembled smoothly and protect from oxidizing the O-rings.
If necessary, please replace the spare O-ring attached in the package.
Max Output
Please mind the heat. When the light runs a long time, there is heat coming from the battery discharge, drive circuit and LED. The flashlight head will be very hot.
DO NOT use the light at Max mode for a long time. To protect the battery, drive circuit and LED, we do not recommend you run the light at Max mode more than ten minutes. Kindly Notes: Payment
1. We ONLY accept PayPal payments .
2. Payments must be received within 7 days from the auction end date.
3. We are not responsible for any custom duty or import tax.Shipping
1. All items will be shipped within 48 business hours upon receipt of payment (except weekends and holidays).
(If Payments are received on weekends or holidays, goods will be shipped on the following business day.
Please understand that holidays and weekends are not regarded as business days.)
2. All items will be shipped by E-Packet or Registered Airmail with tracking number.
3. Buyer confirms (offers) address & Phone number after order item.
1> Please write down the real address.
2> Please write down the right post code and city name.
3> Please do not breviate street name.
4> because of the abbreviated address, the post man can not dispatch the item and return the parcel, the buyers will be responsible for any loss.Contact Us
If you have any questions, please contact us via the eBay Message System before leaving any negative feedback or open any dispute on PayPal.
To e-mail us, please click the 'Ask a question.
7Modes from Firefly to Strobe
Designed for flasholics only, ThruNite TN32 UT LED Thrower Flashlight adopts an advanced CREE XPL HI LED to give max output up to 1150 lumens
and features smooth reflector to give perfect beam and throw.
The TN32 UT also has a streamline design and very beautiful body, with the bass circuit warehouse to provide better heat dissipation performance.
Moreover, it weighs only 653 grams and is very convenient to carry on, making it ideal for tactical, searching and rescue purposes.
Features and Specifications
Adopts advanced CREE XP-L HI LED with a lifespan of 20+ years of run time.
Bass circuit warehouse provides better heat dissipation performance.
Runs on: 3 x 18650 batteries (NOT included).
Max output: 1150 lumens.
Max beam distance: 1043 meters.
Peak beam intensity: 272000 cd
Working voltage: DC 8V-13V.
Output & Run time (Tested with 3 x 18650 3400mAh)
-Firefly mode: 0.4lumens (40days)
-Low:11lumens (13days)
-Medium: 178lumens (21hrs)
-High:438lumens (7.6hrs)
-738lumens (3.8hrs), 1150lumens (2hrs), Strobe (1150lumens /6hrs).
Aircraft-grade aluminum body with Premium Type III hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with anti-reflective coating.
Smooth reflector gives perfect beam and throw.
Reverse polarity protection design to well prevent from improper battery installation.
Waterproof: IPX-8 Standard (2M).
Impact resistance: 1.5M.
Dimension: 201mm(length)*79mm(bezel diameter).
Weight: 653g (without batteries).
Accessories (included): 1 x Holster, 1 x Lanyard, 1 x O-ring, 1 x User Manual.
(Kindly note: The package is without any batteries)
Operation:
Turn ON/OFF
Click the tail switch to turn on/off.
Tactical Lighting/Momentary On
Half press the tail cap button, the flashlight will turn on temporarily; release the button at the tail cap, the light will turn off.
Change Modes
When the light turned on, rotating the Control Ring to cycle through six brightness levels, stand-by and strobe mode smoothly.
Cautions:
Use of Battery
Battery: uses 3 *18650 batteries. (NOT Included)
Battery Replacement: to ensure performance of the flashlight and for your own safety, please use high-quality batteries with an integrated protected circuit and make sure to insert the batteries correctly with the negative (-) polarities connecting the springs in the battery carrier.
Please take out the batteries if you will not use your light for an extended period of time to avoid battery leakage, which may damage the flashlight components and parts.
Use of O-rings (if available)
A right amount of lubricant will be used on the O-rings before shipping to ensure the light can be assembled smoothly and protect from oxidizing the O-rings.
If necessary, please replace the spare O-ring attached in the package.
Max Output
Please mind the heat. When the light runs a long time, there is heat coming from the battery discharge, drive circuit and LED. The flashlight head will be very hot.
DO NOT use the light at Max mode for a long time. To protect the battery, drive circuit and LED, we do not recommend you run the light at Max mode more than ten minutes. Kindly Notes: Payment
1. We ONLY accept PayPal payments .
2. Payments must be received within 7 days from the auction end date.
3. We are not responsible for any custom duty or import tax.Shipping
1. All items will be shipped within 48 business hours upon receipt of payment (except weekends and holidays).
(If Payments are received on weekends or holidays, goods will be shipped on the following business day.
Please understand that holidays and weekends are not regarded as business days.)
2. All items will be shipped by E-Packet or Registered Airmail with tracking number.
3. Buyer confirms (offers) address & Phone number after order item.
1> Please write down the real address.
2> Please write down the right post code and city name.
3> Please do not breviate street name.
4> because of the abbreviated address, the post man can not dispatch the item and return the parcel, the buyers will be responsible for any loss.Contact Us
If you have any questions, please contact us via the eBay Message System before leaving any negative feedback or open any dispute on PayPal.
To e-mail us, please click the 'Ask a question.