Back to the main page Back to category Carabiners and Hardware
watch details
Ladder rescue system 18 ft ladder including belay system ANSI & CE-EN Certified
Estimated price for orientation: 665 $
Category: Carabiners and Hardware
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: ClimbTech MPN: CTB LDR-RSC UPC: Does not apply
Product Description For Ladder rescue system 18ft ladder including belay system with snaphook connected to a webbing loop or webbing lanyard. Compliance: ANSI Z359.7 & CE-EN 795
The ladder kit allows a capable fall victim to climb to safety while the rescuer pulls rope slack through the included rope grab eliminating the chance of a high impact secondary fall. • Use only with ANSI/OSHA compliant personal fall arrest or restraint systems.The anchorage must have the strength capable of supporting a static load, applied in the directions permitted by the system, of at least 5,000-lbf (22kN) in the absence of certification. • The user shall be equipped with a means of limiting forces exerted on this product to static loads at or below 310 lbs. (141 kg) • The rescue system is designed for single user, with a capacity up to 310 lbs. (141 kg) including clothing, tools, etc. • The rescue system is designed to be used in temperatures ranging from -40ºF to +130ºF (-40°C to +54°C). • Do not use the rescue system for fall protection purposes. Only static loading is permitted • A snaphook connected to a webbing loop or webbing lanyard. • Improper dimensions of the D-ring, rebar, or other connection point in relation to the snaphook dimensions that would allow the snaphook keeper to be depressed by a turning motion of the snaphook. • Rollout: A process by which a snaphook or carabiner unintentionally disengages from another connector or object to which it is coupled. (ANSI Z359.1-2007)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | ClimbTech |
| MPN: | CTB LDR-RSC | UPC: | Does not apply |
Product Description For Ladder rescue system 18ft ladder including belay system with snaphook connected to a webbing loop or webbing lanyard. Compliance: ANSI Z359.7 & CE-EN 795
The ladder kit allows a capable fall victim to climb to safety while the rescuer pulls rope slack through the included rope grab eliminating the chance of a high impact secondary fall. • Use only with ANSI/OSHA compliant personal fall arrest or restraint systems.The anchorage must have the strength capable of supporting a static load, applied in the directions permitted by the system, of at least 5,000-lbf (22kN) in the absence of certification. • The user shall be equipped with a means of limiting forces exerted on this product to static loads at or below 310 lbs. (141 kg) • The rescue system is designed for single user, with a capacity up to 310 lbs. (141 kg) including clothing, tools, etc. • The rescue system is designed to be used in temperatures ranging from -40ºF to +130ºF (-40°C to +54°C). • Do not use the rescue system for fall protection purposes. Only static loading is permitted • A snaphook connected to a webbing loop or webbing lanyard. • Improper dimensions of the D-ring, rebar, or other connection point in relation to the snaphook dimensions that would allow the snaphook keeper to be depressed by a turning motion of the snaphook. • Rollout: A process by which a snaphook or carabiner unintentionally disengages from another connector or object to which it is coupled. (ANSI Z359.1-2007)
The ladder kit allows a capable fall victim to climb to safety while the rescuer pulls rope slack through the included rope grab eliminating the chance of a high impact secondary fall. • Use only with ANSI/OSHA compliant personal fall arrest or restraint systems.The anchorage must have the strength capable of supporting a static load, applied in the directions permitted by the system, of at least 5,000-lbf (22kN) in the absence of certification. • The user shall be equipped with a means of limiting forces exerted on this product to static loads at or below 310 lbs. (141 kg) • The rescue system is designed for single user, with a capacity up to 310 lbs. (141 kg) including clothing, tools, etc. • The rescue system is designed to be used in temperatures ranging from -40ºF to +130ºF (-40°C to +54°C). • Do not use the rescue system for fall protection purposes. Only static loading is permitted • A snaphook connected to a webbing loop or webbing lanyard. • Improper dimensions of the D-ring, rebar, or other connection point in relation to the snaphook dimensions that would allow the snaphook keeper to be depressed by a turning motion of the snaphook. • Rollout: A process by which a snaphook or carabiner unintentionally disengages from another connector or object to which it is coupled. (ANSI Z359.1-2007)