Back to the main page Back to category Flashlights
watch details
ACEBEAM X60M 10000lumens 3x CREE MT-G2 q0 LED Magnetic Ring Control Flashlight
Estimated price for orientation: 510 $
Category: Flashlights
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: ACEBEAM Water Proof: Waterproof to IPX6 standard Model: X60M Maximum Brightnes: 10000lumens MPN: X60M Working voltage: 18v-25.6v Torch Type: LED Impact resistant: 1.2meters Max beam intensity: 69000cd UPC: 9726458774225
ACEBEAM X60M 3x CREE MT-G2 LED Magnetic Control Flashlight 10000lumens ACEBEAM X60M flashlight's versatile modes of output are easily accessible by simply rotating the ring, all modes are completely silent, allowing for mode selection without detection.
1) ACEBEAM X60M support real time electric quantity display, and the following illustration apply to the highest lumens output state.
2) There is a battery indicator LED located on the rear tailcap of the flashlight: If the indicator light shows green, it means the batteries' capacity is sufficient and more than 50% battery capacity is available. If the batteries' capacity is 30%-50%, the indicator light will display orange. If the indicator light shows red, it means the batteries' capacity is lower than 30%. In case of very low electric capacity (less than 10% of the total electric capacity) for critically low battery capacity, the indicator light will show red and flicker. We sugget you charge the flashlight when the brightness of flashlight decreases significantly. In case of battery failure, please charge the batteries.
3) Charging method: When the indicator LED at the flashlight tailcap is red and flickering, the batteries need to be charged. As shown in the figure, put the magnetic charging interface close to the charging position at flashlight tail, it will be attracted by magnetic force automatically and begin the charging process. Three are three kinds of interfaces at the other side: USB interface / car charger inteface / AC/DC charging interface, which can meet the requirements of various situations. Each battery is charged at 500mA current, and total current is 3.0A for six batteries. The unique charging method can guarantee safety during charging. After about seven hours, the indicator lights will show green, and turn into the state of trickle charging.Feature & Specification
- LED: 3x CREE MT-G2 LED with a lifespan of 50, 000 hours.
- Maximum Brightnes: 10000lumens.
- Level1: 30lm 150hours,
- Level2: 200lm 10000lm, infinite brightness mode,
- Strobe: 10000lm,
- Working voltage: 18v-25.6v
- Max runtime: 150hours
- Max beam intensity: 69000cd (1meter distance)
- Impact resistant: 1.2meters
- Waterproof to IPX6 standard
- Size: 276mm (length) x 108mm (head diameter) x 49mm (Tube diameter)
- Weight: 850g without battery
- Altrua durable Aluminum alloy 6063
- Premium type II hard anodized and anti-reflective coating, which achieves a 98.3% ight transmittance.
- Strobe mode for tactical and emergency use.
- High-polish aluminum alloy reflector.
- Highly focused beam for maximum distance.
- Streamlined body design.
- Mechanical reversed polarity protection design for battery carrier.
- Intelligent highly efficient circuit board design for max performance and long runtime.
- Customer can also order our accessories to fix the flashlight on bracket for lighting in courtard, warehouse and open place.
- Accessories include O-ring, USB charging cord, car charger (Including USB interface), AC/DC adapter (including USB interface), holster, user manual, lanyard, warranty and Aluminum box.Notice: The above-mentioned parameters (tested with three 3400mAh 18650 batteries) are approximate and may vary between flashlights, batteries and environments.Hoe to operate ACEBEAM X40 XM-2 LED Flashlight?
ON/OFF Switching
- Switch ON: Press the push button down completely until a "click" sound is heard and flashlight turns on.
- Switch OFF: Press the pussh button down a second time until a "click" sound is heard and light is turned off.
Mode Switching
- With the light turned on, rotating the control ring to select firefly mode, infinite mode and strobe smoothly.How to repleace 6x 18650 batteries in ACEBEAM X60M flashlight?
1. Unscrew the tail part in counter-clockwise direction.
2. Remove the battery carrier.
3. Put batteries in the battery carrier, with the negative end (flat one ) of the battery pointing to the spring.
4. Insert the battery carrier back into the body.
5. Screw the tail part back tightly in a clockwise direction.Note: Please make sure to put the battiers in the right direction.Limited Lifetime Warranty
- Free Repair Service.
- Cost of parts and shipping fee will be charged.
- Notify us before return or repair.Package included (with the original package)
- ACEBEAM X60M flashlight
- ACEBEAM belt
- ACEBEAM Aluminum box
- Car charger (including USB interface)
- 100V -240V AC/DC adapter (included USB interface) (US Plug or Eurepean plug).
- USB charging cord
- lanyard
- Plastic cover on the tail-cap
- Spare O-ring
- English Manual
- Warranty cardRemark: The package is without any batteries.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | ACEBEAM |
| Water Proof: | Waterproof to IPX6 standard | Model: | X60M |
| Maximum Brightnes: | 10000lumens | MPN: | X60M |
| Working voltage: | 18v-25.6v | Torch Type: | LED |
| Impact resistant: | 1.2meters | Max beam intensity: | 69000cd |
| UPC: | 9726458774225 |
ACEBEAM X60M 3x CREE MT-G2 LED Magnetic Control Flashlight 10000lumens ACEBEAM X60M flashlight's versatile modes of output are easily accessible by simply rotating the ring, all modes are completely silent, allowing for mode selection without detection.
1) ACEBEAM X60M support real time electric quantity display, and the following illustration apply to the highest lumens output state.
2) There is a battery indicator LED located on the rear tailcap of the flashlight: If the indicator light shows green, it means the batteries' capacity is sufficient and more than 50% battery capacity is available. If the batteries' capacity is 30%-50%, the indicator light will display orange. If the indicator light shows red, it means the batteries' capacity is lower than 30%. In case of very low electric capacity (less than 10% of the total electric capacity) for critically low battery capacity, the indicator light will show red and flicker. We sugget you charge the flashlight when the brightness of flashlight decreases significantly. In case of battery failure, please charge the batteries.
3) Charging method: When the indicator LED at the flashlight tailcap is red and flickering, the batteries need to be charged. As shown in the figure, put the magnetic charging interface close to the charging position at flashlight tail, it will be attracted by magnetic force automatically and begin the charging process. Three are three kinds of interfaces at the other side: USB interface / car charger inteface / AC/DC charging interface, which can meet the requirements of various situations. Each battery is charged at 500mA current, and total current is 3.0A for six batteries. The unique charging method can guarantee safety during charging. After about seven hours, the indicator lights will show green, and turn into the state of trickle charging.Feature & Specification
- LED: 3x CREE MT-G2 LED with a lifespan of 50, 000 hours.
- Maximum Brightnes: 10000lumens.
- Level1: 30lm 150hours,
- Level2: 200lm 10000lm, infinite brightness mode,
- Strobe: 10000lm,
- Working voltage: 18v-25.6v
- Max runtime: 150hours
- Max beam intensity: 69000cd (1meter distance)
- Impact resistant: 1.2meters
- Waterproof to IPX6 standard
- Size: 276mm (length) x 108mm (head diameter) x 49mm (Tube diameter)
- Weight: 850g without battery
- Altrua durable Aluminum alloy 6063
- Premium type II hard anodized and anti-reflective coating, which achieves a 98.3% ight transmittance.
- Strobe mode for tactical and emergency use.
- High-polish aluminum alloy reflector.
- Highly focused beam for maximum distance.
- Streamlined body design.
- Mechanical reversed polarity protection design for battery carrier.
- Intelligent highly efficient circuit board design for max performance and long runtime.
- Customer can also order our accessories to fix the flashlight on bracket for lighting in courtard, warehouse and open place.
- Accessories include O-ring, USB charging cord, car charger (Including USB interface), AC/DC adapter (including USB interface), holster, user manual, lanyard, warranty and Aluminum box.Notice: The above-mentioned parameters (tested with three 3400mAh 18650 batteries) are approximate and may vary between flashlights, batteries and environments.Hoe to operate ACEBEAM X40 XM-2 LED Flashlight?
ON/OFF Switching
- Switch ON: Press the push button down completely until a "click" sound is heard and flashlight turns on.
- Switch OFF: Press the pussh button down a second time until a "click" sound is heard and light is turned off.
Mode Switching
- With the light turned on, rotating the control ring to select firefly mode, infinite mode and strobe smoothly.How to repleace 6x 18650 batteries in ACEBEAM X60M flashlight?
1. Unscrew the tail part in counter-clockwise direction.
2. Remove the battery carrier.
3. Put batteries in the battery carrier, with the negative end (flat one ) of the battery pointing to the spring.
4. Insert the battery carrier back into the body.
5. Screw the tail part back tightly in a clockwise direction.Note: Please make sure to put the battiers in the right direction.Limited Lifetime Warranty
- Free Repair Service.
- Cost of parts and shipping fee will be charged.
- Notify us before return or repair.Package included (with the original package)
- ACEBEAM X60M flashlight
- ACEBEAM belt
- ACEBEAM Aluminum box
- Car charger (including USB interface)
- 100V -240V AC/DC adapter (included USB interface) (US Plug or Eurepean plug).
- USB charging cord
- lanyard
- Plastic cover on the tail-cap
- Spare O-ring
- English Manual
- Warranty cardRemark: The package is without any batteries.
1) ACEBEAM X60M support real time electric quantity display, and the following illustration apply to the highest lumens output state.
2) There is a battery indicator LED located on the rear tailcap of the flashlight: If the indicator light shows green, it means the batteries' capacity is sufficient and more than 50% battery capacity is available. If the batteries' capacity is 30%-50%, the indicator light will display orange. If the indicator light shows red, it means the batteries' capacity is lower than 30%. In case of very low electric capacity (less than 10% of the total electric capacity) for critically low battery capacity, the indicator light will show red and flicker. We sugget you charge the flashlight when the brightness of flashlight decreases significantly. In case of battery failure, please charge the batteries.
3) Charging method: When the indicator LED at the flashlight tailcap is red and flickering, the batteries need to be charged. As shown in the figure, put the magnetic charging interface close to the charging position at flashlight tail, it will be attracted by magnetic force automatically and begin the charging process. Three are three kinds of interfaces at the other side: USB interface / car charger inteface / AC/DC charging interface, which can meet the requirements of various situations. Each battery is charged at 500mA current, and total current is 3.0A for six batteries. The unique charging method can guarantee safety during charging. After about seven hours, the indicator lights will show green, and turn into the state of trickle charging.Feature & Specification
- LED: 3x CREE MT-G2 LED with a lifespan of 50, 000 hours.
- Maximum Brightnes: 10000lumens.
- Level1: 30lm 150hours,
- Level2: 200lm 10000lm, infinite brightness mode,
- Strobe: 10000lm,
- Working voltage: 18v-25.6v
- Max runtime: 150hours
- Max beam intensity: 69000cd (1meter distance)
- Impact resistant: 1.2meters
- Waterproof to IPX6 standard
- Size: 276mm (length) x 108mm (head diameter) x 49mm (Tube diameter)
- Weight: 850g without battery
- Altrua durable Aluminum alloy 6063
- Premium type II hard anodized and anti-reflective coating, which achieves a 98.3% ight transmittance.
- Strobe mode for tactical and emergency use.
- High-polish aluminum alloy reflector.
- Highly focused beam for maximum distance.
- Streamlined body design.
- Mechanical reversed polarity protection design for battery carrier.
- Intelligent highly efficient circuit board design for max performance and long runtime.
- Customer can also order our accessories to fix the flashlight on bracket for lighting in courtard, warehouse and open place.
- Accessories include O-ring, USB charging cord, car charger (Including USB interface), AC/DC adapter (including USB interface), holster, user manual, lanyard, warranty and Aluminum box.Notice: The above-mentioned parameters (tested with three 3400mAh 18650 batteries) are approximate and may vary between flashlights, batteries and environments.Hoe to operate ACEBEAM X40 XM-2 LED Flashlight?
ON/OFF Switching
- Switch ON: Press the push button down completely until a "click" sound is heard and flashlight turns on.
- Switch OFF: Press the pussh button down a second time until a "click" sound is heard and light is turned off.
Mode Switching
- With the light turned on, rotating the control ring to select firefly mode, infinite mode and strobe smoothly.How to repleace 6x 18650 batteries in ACEBEAM X60M flashlight?
1. Unscrew the tail part in counter-clockwise direction.
2. Remove the battery carrier.
3. Put batteries in the battery carrier, with the negative end (flat one ) of the battery pointing to the spring.
4. Insert the battery carrier back into the body.
5. Screw the tail part back tightly in a clockwise direction.Note: Please make sure to put the battiers in the right direction.Limited Lifetime Warranty
- Free Repair Service.
- Cost of parts and shipping fee will be charged.
- Notify us before return or repair.Package included (with the original package)
- ACEBEAM X60M flashlight
- ACEBEAM belt
- ACEBEAM Aluminum box
- Car charger (including USB interface)
- 100V -240V AC/DC adapter (included USB interface) (US Plug or Eurepean plug).
- USB charging cord
- lanyard
- Plastic cover on the tail-cap
- Spare O-ring
- English Manual
- Warranty cardRemark: The package is without any batteries.