350 $
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Eberlestock |
| UPC: | 634392273805 | MPN: | G3MEBY05PS |
Comes with FREE Spyderco Flight Byrd Knife The Phantom introduces a new type of tactical pack system; it's the first product that provides an integrated drag bag and backpack. It allows you to carry your heavy weapon in the backpack, either with or without the concealing top-cover. If the cover is not mounted, you can withdraw a full-scale rifle from the pack very quickly. Or, with the cover over the weapon, nobody needs to know what you are carrying. And if you leave the Control Clips undone, you can still pull the gun right out. The waistbelt can be removed, and the harness can be mounted to the bag so that the pack can be used as a conventional, non-scabbard pack. The Phantom incorporates Eberlestock's unique approach to a variable-length gun case / drag bag, and allows you to carry a wide variety of tactical weapons. The top-cover incorporates a pull-out sleeve that goes over the butt of the rifle and the optics. It provides a good amount of overlap for keeping debris out of the gun compartment when dragging. The bag can fully enclose a weapon up to 60" in length.
The Phantom pack is a Gunslinger-sized pack in its main load bay, but offers a little more capacity because it is equipped with outboard hydration/radio pockets. It offers the ability to remove the bag and straps from the patented Backscabbard™, which can then be combined with the top-cover to make an excellent drag bag. It's a front-loader, with two levels of varying-sized tuck-pockets lining its interior, PALS racks inside and out, and a fold-down shelf that can be used to divide the main compartment into upper and lower chambers. A plasticized mesh "rack" on the back wall of the upper chamber can be used to carry larger radios or other items. It will carry two 3-liter hydration kits, mounted in side pockets. It features a longer waistbelt, with a 5 x 3 PALS matrix on each side.The modular system lets you choose how much or how little of the system you need for your mission: The full set, just the Backscabbard, just the pack, or a drag bag. The pack includes a lightweight pull-out rain cover, which stows in a pocket on the bottom of the main compartment. It can be used to cover the whole pack and the weapon that's being carried, or just the pack -- so that you can pull your weapon from the Backscabbard™. As tested by the NTOA Eberlestock's G3M Phantom has been awarded a PERFECT SCORE... "5" in EVERY CATEGORY by the National Tactical Officer Association's "Member Tested and Recommended" evaluators. Anybody who knows tactical law enforcement officers is aware that this type of praise does not come lightly. Thank you to all at the NTOA. The Flight has a hollow-ground blade manufactured using 8Cr13MoV stainless steel, which is similar to AUS-8 in its properties, performance and function. 8Cr13MoV steel contains both molybdenum and vanadium.
The "comet" shaped opening hole is a trademark of the byrd line and is synonymous with the stringent quality requirements, high performance materials and manufacturing, which go into every knife. fully stainless handles have a sequence of ergonomic curves that fit into the palm for comfort and fatigue-free control while cutting. For additional safety, a portion of the lock release is ground away. This is a design add-on conceived by custom knifemaker David Boye and eliminates the chance of gripping the knife tightly enough to unintentionally release the lock. All byrds feature a pocket clip that clips the knife inside a pocket and it attaches to either end of the folder for tip-up or tip-down right-hand carry.
The Phantom pack is a Gunslinger-sized pack in its main load bay, but offers a little more capacity because it is equipped with outboard hydration/radio pockets. It offers the ability to remove the bag and straps from the patented Backscabbard™, which can then be combined with the top-cover to make an excellent drag bag. It's a front-loader, with two levels of varying-sized tuck-pockets lining its interior, PALS racks inside and out, and a fold-down shelf that can be used to divide the main compartment into upper and lower chambers. A plasticized mesh "rack" on the back wall of the upper chamber can be used to carry larger radios or other items. It will carry two 3-liter hydration kits, mounted in side pockets. It features a longer waistbelt, with a 5 x 3 PALS matrix on each side.The modular system lets you choose how much or how little of the system you need for your mission: The full set, just the Backscabbard, just the pack, or a drag bag. The pack includes a lightweight pull-out rain cover, which stows in a pocket on the bottom of the main compartment. It can be used to cover the whole pack and the weapon that's being carried, or just the pack -- so that you can pull your weapon from the Backscabbard™. As tested by the NTOA Eberlestock's G3M Phantom has been awarded a PERFECT SCORE... "5" in EVERY CATEGORY by the National Tactical Officer Association's "Member Tested and Recommended" evaluators. Anybody who knows tactical law enforcement officers is aware that this type of praise does not come lightly. Thank you to all at the NTOA. The Flight has a hollow-ground blade manufactured using 8Cr13MoV stainless steel, which is similar to AUS-8 in its properties, performance and function. 8Cr13MoV steel contains both molybdenum and vanadium.
The "comet" shaped opening hole is a trademark of the byrd line and is synonymous with the stringent quality requirements, high performance materials and manufacturing, which go into every knife. fully stainless handles have a sequence of ergonomic curves that fit into the palm for comfort and fatigue-free control while cutting. For additional safety, a portion of the lock release is ground away. This is a design add-on conceived by custom knifemaker David Boye and eliminates the chance of gripping the knife tightly enough to unintentionally release the lock. All byrds feature a pocket clip that clips the knife inside a pocket and it attaches to either end of the folder for tip-up or tip-down right-hand carry.