Back to the main page Back to category Flashlights
watch details
Custom Upgrade Service for Surefire X300 (3500 Lumens)
Estimated price for orientation: 346 $
Category: Flashlights
Class:
Description
Triple Surefire X300 3500 Lumen Upgrade Service
Make your super compact weapon light the
best in the business by upgrading it with our custom v5 microprocessor
controlled 3500 lumen XPL LED driver board.
Use Adaptations:
Customize Behavior - Fully User re- after delivery
Minimum Weight with a custom aluminum heatsink
Faster Subject Recognition with neutral tint
Reduce your sweep arc with ultra bright floody beam
Clear Buildings and Yards safer and in less time
Fill Shadows in full daylight with up to 3500L
No PWM - sound and flicker free operation at all power levels
Test cell voltage right on your weapon with 111 PIN
Power Adaptations:
Input voltage range from 2.5v to 8.8v (1-2 cells)
Fully qualified between -40 and 248F (-40 and 120C)
Reversed battery polarity protection
Under and over voltage protection (2.5/8.8v)
Run with one cell + spacer for second mode group
Design Adaptations:
Adaptive temperature control (reduces output only 1/33rd as needed)
Integrated thermal safety protection at 65C (149F)
Fully qualified between -40 and 248F (-40 and 120C)
Integrated thermal overheating protection at 120C (248F)
Shock proof materials, components, and design
Forum Reviews:
(XPG version)
Eligiability:
This is an upgrade service to your existing light and does not include the base light
This service supports only the Surefire x300
This service does not support the the Surefire x200 or x300u or y300u or x400
This service is from/to USA addresses only
Instructions: 1) chose options and add the X300 upgrade to cart and complete checkout
2) wait for our secure shipping tube with packaging and postage to arrive 3) remove both brass plugs from one end of shipping tube
4) remove cap from this end and place all 3 parts aside
5) remove the green shipping label (you to TL) and foam from the tube
6) remove and hold extra items you may have ordered (batteries etc) 7) open the slot, do not cut or remove tape from foam tube
8) place your x300 inside the foam and then foam inside the tube
9) include: receipt (or configuration preference) and red postage label
10) replace the end cap and affix the green shipping label on the outside
11) insert both brass plugs through the same holes and spread apart
if holes don't line up, rotate white cap 180 degrees 12) drop the newly sealed/addressed tube into the mail (usps locations)
13) wait for your updated x300 to arrive back in the mail
14) note the 3 tracking numbers for each leg of the trip,
OVEREADY to you, you to TorchLAB, TorchLAB to you.
For multipe lights, add each to your cart and return here for the next
Operational Warnings:
Do not attempt to unscrew head
Keep cells in matched pairs (A1+A2 used together, B1+B2 used together, etc)
2016 (15c) cells are recommended at all times
Battery Notes:
Do not use CR123 above 1000L
Do not use normal IMR above 2000L
Only use cells rated above 6 amps for full power
16340 only for 3500L (15c = 8 amps)
For Longevity, recharge soon after draining
All runtimes based on 2016 16340 (15c = 8 amps)
Runtimes are worst case, actual times will be longer
Stretch mode on and recommended for end of runtime taper
Light/Heat Precautions:
Monitor temperature during use
Do not leave unattended while running
Light will get hot if run continously for 5 minutes or more
Continuous operation depends on ambient temperature and airflow
This light creates excessive heat.
This light may cause eye damage
This light may burn the skin at close range.
This light may cause combustibles to ignite
This light is not a toy, keep away from children
This service performed in
Description
Triple Surefire X300 3500 Lumen Upgrade Service
Make your super compact weapon light the best in the business by upgrading it with our custom v5 microprocessor controlled 3500 lumen XPL LED driver board.
Use Adaptations:
Customize Behavior - Fully User re- after delivery Minimum Weight with a custom aluminum heatsink Faster Subject Recognition with neutral tint Reduce your sweep arc with ultra bright floody beam Clear Buildings and Yards safer and in less time Fill Shadows in full daylight with up to 3500L No PWM - sound and flicker free operation at all power levels Test cell voltage right on your weapon with 111 PIN Power Adaptations:
Input voltage range from 2.5v to 8.8v (1-2 cells)
Fully qualified between -40 and 248F (-40 and 120C) Reversed battery polarity protection Under and over voltage protection (2.5/8.8v) Run with one cell + spacer for second mode group Design Adaptations:
Adaptive temperature control (reduces output only 1/33rd as needed) Integrated thermal safety protection at 65C (149F) Fully qualified between -40 and 248F (-40 and 120C) Integrated thermal overheating protection at 120C (248F) Shock proof materials, components, and design Forum Reviews:
(XPG version)
Eligiability: This is an upgrade service to your existing light and does not include the base light This service supports only the Surefire x300 This service does not support the the Surefire x200 or x300u or y300u or x400 This service is from/to USA addresses only Instructions: 1) chose options and add the X300 upgrade to cart and complete checkout
2) wait for our secure shipping tube with packaging and postage to arrive 3) remove both brass plugs from one end of shipping tube
4) remove cap from this end and place all 3 parts aside
5) remove the green shipping label (you to TL) and foam from the tube
6) remove and hold extra items you may have ordered (batteries etc) 7) open the slot, do not cut or remove tape from foam tube
8) place your x300 inside the foam and then foam inside the tube
9) include: receipt (or configuration preference) and red postage label
10) replace the end cap and affix the green shipping label on the outside
11) insert both brass plugs through the same holes and spread apart
if holes don't line up, rotate white cap 180 degrees 12) drop the newly sealed/addressed tube into the mail (usps locations)
13) wait for your updated x300 to arrive back in the mail
14) note the 3 tracking numbers for each leg of the trip,
OVEREADY to you, you to TorchLAB, TorchLAB to you.
For multipe lights, add each to your cart and return here for the next Operational Warnings: Do not attempt to unscrew head Keep cells in matched pairs (A1+A2 used together, B1+B2 used together, etc)
2016 (15c) cells are recommended at all times
Battery Notes:
Do not use CR123 above 1000L Do not use normal IMR above 2000L Only use cells rated above 6 amps for full power 16340 only for 3500L (15c = 8 amps)
For Longevity, recharge soon after draining
All runtimes based on 2016 16340 (15c = 8 amps) Runtimes are worst case, actual times will be longer Stretch mode on and recommended for end of runtime taper Light/Heat Precautions:
Monitor temperature during use
Do not leave unattended while running Light will get hot if run continously for 5 minutes or more Continuous operation depends on ambient temperature and airflow
This light creates excessive heat. This light may cause eye damage
This light may burn the skin at close range.
This light may cause combustibles to ignite
This light is not a toy, keep away from children
This service performed in
Make your super compact weapon light the best in the business by upgrading it with our custom v5 microprocessor controlled 3500 lumen XPL LED driver board.
Use Adaptations:
Customize Behavior - Fully User re- after delivery Minimum Weight with a custom aluminum heatsink Faster Subject Recognition with neutral tint Reduce your sweep arc with ultra bright floody beam Clear Buildings and Yards safer and in less time Fill Shadows in full daylight with up to 3500L No PWM - sound and flicker free operation at all power levels Test cell voltage right on your weapon with 111 PIN Power Adaptations:
Input voltage range from 2.5v to 8.8v (1-2 cells)
Fully qualified between -40 and 248F (-40 and 120C) Reversed battery polarity protection Under and over voltage protection (2.5/8.8v) Run with one cell + spacer for second mode group Design Adaptations:
Adaptive temperature control (reduces output only 1/33rd as needed) Integrated thermal safety protection at 65C (149F) Fully qualified between -40 and 248F (-40 and 120C) Integrated thermal overheating protection at 120C (248F) Shock proof materials, components, and design Forum Reviews:
(XPG version)
Eligiability: This is an upgrade service to your existing light and does not include the base light This service supports only the Surefire x300 This service does not support the the Surefire x200 or x300u or y300u or x400 This service is from/to USA addresses only Instructions: 1) chose options and add the X300 upgrade to cart and complete checkout
2) wait for our secure shipping tube with packaging and postage to arrive 3) remove both brass plugs from one end of shipping tube
4) remove cap from this end and place all 3 parts aside
5) remove the green shipping label (you to TL) and foam from the tube
6) remove and hold extra items you may have ordered (batteries etc) 7) open the slot, do not cut or remove tape from foam tube
8) place your x300 inside the foam and then foam inside the tube
9) include: receipt (or configuration preference) and red postage label
10) replace the end cap and affix the green shipping label on the outside
11) insert both brass plugs through the same holes and spread apart
if holes don't line up, rotate white cap 180 degrees 12) drop the newly sealed/addressed tube into the mail (usps locations)
13) wait for your updated x300 to arrive back in the mail
14) note the 3 tracking numbers for each leg of the trip,
OVEREADY to you, you to TorchLAB, TorchLAB to you.
For multipe lights, add each to your cart and return here for the next Operational Warnings: Do not attempt to unscrew head Keep cells in matched pairs (A1+A2 used together, B1+B2 used together, etc)
2016 (15c) cells are recommended at all times
Battery Notes:
Do not use CR123 above 1000L Do not use normal IMR above 2000L Only use cells rated above 6 amps for full power 16340 only for 3500L (15c = 8 amps)
For Longevity, recharge soon after draining
All runtimes based on 2016 16340 (15c = 8 amps) Runtimes are worst case, actual times will be longer Stretch mode on and recommended for end of runtime taper Light/Heat Precautions:
Monitor temperature during use
Do not leave unattended while running Light will get hot if run continously for 5 minutes or more Continuous operation depends on ambient temperature and airflow
This light creates excessive heat. This light may cause eye damage
This light may burn the skin at close range.
This light may cause combustibles to ignite
This light is not a toy, keep away from children
This service performed in