Back to the main page Back to category Flashlights
watch details
Surefire 6P v5 Triple XPL Custom HA/bored (3500 Lumens)
Estimated price for orientation: 390 $
Category: Flashlights
Class:
Description
Triple XPL/219 Surefire 6P
Each light is built to order, with 3500 lumen light engine (2 cell XPL - 1600 for 219), custom HA 6P, McClicky switch, and UCL lens.
6P to accept 18650 or 2x18350
Z44 Hexagonal anti-roll bezel with UCL lens upgrade
McClicky switch with choice of boot
Programmable Features:
0.18 lumen low: (weeks of candle bright runtime)
3500 lumen high: near 20,000x higher high than lowest low
Battery swap mode groups (independent 1 and 2 cell modes)
As few as 1 mode per group (1+1) and up to 4 per group (4+4)
Program modes from among 33 white levels plus red (3+1 LEDs)
SOS, strobe, and beacon (defaults are off).
Beacon can be red or white with adjustable timing
Mode memory: Off - On - Hybrid (default is off)
Hybrid stores the last mode but cycles from mode 1 on the next change
Battery stretch starts reducing output at 3.2v, down to 0.5w (default on)
Until overdischarge protection kicks in at 2.8v (default is on)
Bounce protection switches to red when to much light is reflected
It also gives you direct access to red, as a 9th (4+4+1) mode (default off)
Supports 1x ICR/IMR, 2x ICR/IMR, 2x CR123 (CR123 selected in advance)
CR123 reduces output, changes stretch to 2.25v, & disables overdischarge
Universal Features:
Custom high effeciency boost driver and board
Dual light channels, 30w (3x white) + 7ma (1x color)
No PWM - sound and flicker free operation at all power levels
Input voltage range from 2.5v to 8.8v (1-2 cells)
Fully qualified between -40 and 248F (-40 and 120C)
Reversed battery polarity protection
Under and over voltage protection (2.5/8.8v)
Adaptive temperature control (reduces output only 1/33rd as needed)
Integrated thermal safety protection at 65C (149F)
Integrated thermal overheating protection at 120C (248F)
Shock proof materials, components, and design
CAUTIONS:
Do not leave unattended while running on high
are recommended minimum.
This light creates excessive heat
This light may cause eye damage
This light may burn the skin at close range
This light may cause combustibles to ignite
This light is not a toy, keep away from children
Please see our for complete information or to upgrade a 6P you already have
This item is made in &
Description
Triple XPL/219 Surefire 6P
Each light is built to order, with 3500 lumen light engine (2 cell XPL - 1600 for 219), custom HA 6P, McClicky switch, and UCL lens.
6P to accept 18650 or 2x18350
Z44 Hexagonal anti-roll bezel with UCL lens upgrade McClicky switch with choice of boot Programmable Features: 0.18 lumen low: (weeks of candle bright runtime) 3500 lumen high: near 20,000x higher high than lowest low Battery swap mode groups (independent 1 and 2 cell modes) As few as 1 mode per group (1+1) and up to 4 per group (4+4) Program modes from among 33 white levels plus red (3+1 LEDs) SOS, strobe, and beacon (defaults are off).
Beacon can be red or white with adjustable timing Mode memory: Off - On - Hybrid (default is off)
Hybrid stores the last mode but cycles from mode 1 on the next change Battery stretch starts reducing output at 3.2v, down to 0.5w (default on)
Until overdischarge protection kicks in at 2.8v (default is on) Bounce protection switches to red when to much light is reflected
It also gives you direct access to red, as a 9th (4+4+1) mode (default off) Supports 1x ICR/IMR, 2x ICR/IMR, 2x CR123 (CR123 selected in advance)
CR123 reduces output, changes stretch to 2.25v, & disables overdischarge Universal Features: Custom high effeciency boost driver and board Dual light channels, 30w (3x white) + 7ma (1x color) No PWM - sound and flicker free operation at all power levels Input voltage range from 2.5v to 8.8v (1-2 cells) Fully qualified between -40 and 248F (-40 and 120C) Reversed battery polarity protection Under and over voltage protection (2.5/8.8v) Adaptive temperature control (reduces output only 1/33rd as needed) Integrated thermal safety protection at 65C (149F) Integrated thermal overheating protection at 120C (248F) Shock proof materials, components, and design CAUTIONS:
Do not leave unattended while running on high
are recommended minimum.
This light creates excessive heat This light may cause eye damage
This light may burn the skin at close range
This light may cause combustibles to ignite
This light is not a toy, keep away from children
Please see our for complete information or to upgrade a 6P you already have This item is made in &
Each light is built to order, with 3500 lumen light engine (2 cell XPL - 1600 for 219), custom HA 6P, McClicky switch, and UCL lens.
6P to accept 18650 or 2x18350
Z44 Hexagonal anti-roll bezel with UCL lens upgrade McClicky switch with choice of boot Programmable Features: 0.18 lumen low: (weeks of candle bright runtime) 3500 lumen high: near 20,000x higher high than lowest low Battery swap mode groups (independent 1 and 2 cell modes) As few as 1 mode per group (1+1) and up to 4 per group (4+4) Program modes from among 33 white levels plus red (3+1 LEDs) SOS, strobe, and beacon (defaults are off).
Beacon can be red or white with adjustable timing Mode memory: Off - On - Hybrid (default is off)
Hybrid stores the last mode but cycles from mode 1 on the next change Battery stretch starts reducing output at 3.2v, down to 0.5w (default on)
Until overdischarge protection kicks in at 2.8v (default is on) Bounce protection switches to red when to much light is reflected
It also gives you direct access to red, as a 9th (4+4+1) mode (default off) Supports 1x ICR/IMR, 2x ICR/IMR, 2x CR123 (CR123 selected in advance)
CR123 reduces output, changes stretch to 2.25v, & disables overdischarge Universal Features: Custom high effeciency boost driver and board Dual light channels, 30w (3x white) + 7ma (1x color) No PWM - sound and flicker free operation at all power levels Input voltage range from 2.5v to 8.8v (1-2 cells) Fully qualified between -40 and 248F (-40 and 120C) Reversed battery polarity protection Under and over voltage protection (2.5/8.8v) Adaptive temperature control (reduces output only 1/33rd as needed) Integrated thermal safety protection at 65C (149F) Integrated thermal overheating protection at 120C (248F) Shock proof materials, components, and design CAUTIONS:
Do not leave unattended while running on high
are recommended minimum.
This light creates excessive heat This light may cause eye damage
This light may burn the skin at close range
This light may cause combustibles to ignite
This light is not a toy, keep away from children
Please see our for complete information or to upgrade a 6P you already have This item is made in &