Back to the main page Back to category Flashlights
watch details
Quality Spotlight for Jeep, ATV, or Boat $610 Retail!!! 600 foot Beam, LED
Estimated price for orientation: 100 $
Category: Flashlights
Class:
Description Brand: Larson Electronics UPC: B00R8T4IMC MPN: BCML-LED-30W-335GM-0002-15
High Quality LED Spotlight 600 foot beam For auto or boat.. Factory overstock, Retail: $610 for Automotive, Jeep or Marine Larson
Electronics BCML-LED-30W-335GM-0002-15 Bar Clamp Mount LED Spotlight - 30W LED
- 10" Shaft - 6" Round LED Light Head (Chrome-1.5"). Bar clamp
mount LED spotlight - 30 watt LED - 10 inch shaft - 6 inch round LED light
head(-chrome-1. 5"). the larson electronics bcml-led-30w-335gm bar clamp
mount spotlight offers high light output, low profile housing. This light
Produces a very tight spot pattern, runs on 12 Volts dc, and provides a rugged
lighting solution ideal for use in marine environments, industrial and
commercial applications, Machine vision system lighting, heavy equipment
illumination, vehicle lighting and law enforcement. The bcml-led-30w-335gm LED
bar clamp mount spotlight from larson electronics Produces a 600` long light
beam with 215, 000 candlepower of bright light while drawing only 30 watts at
2. 5 amps from a 12 volt electrical system. Eight high p owered leds are
combined with high purity optics to produce a tight spot beam. This Fixture is
ideal for anyone who is looking for a tight spot light that offers outstanding
life hours of 35, 000+. these LED bar clamp mount spotlights are IP68 rated and
waterproof to three meters, sealed against intrusion by dust and dirt and
ruggedly constructed to withstand demanding environments and applications. It
is constructed of extruded ALUMINUM and feature rubber isolated mounts and
unbreakable polycarbonate lenses to provide durability and resistance to
vibrations, impacts, waves, hard rains, sand and high winds. Heat management:
heat is the single largest factor in premature LED failure and color shifting.
These LED units contain advanced drivers which use pulse WIDTH modulation to
control heat buildup rather than simple voltage regulators which are typically
harsh on sensitive electronics and can contribute to early LED failure. These
units automatically sense the temperature of each LED and adjust the energy
frequency or inch duty cycle" accordingly to maintain heat levels within
acceptable ranges. This system in essence flashes current at an extremely fast
on and off rate to each LED based upon the led's core temperature. Retail price
$610.43 New in sealed factory box.
Description
| Brand: | Larson Electronics | UPC: | B00R8T4IMC |
| MPN: | BCML-LED-30W-335GM-0002-15 |
High Quality LED Spotlight 600 foot beam For auto or boat.. Factory overstock, Retail: $610 for Automotive, Jeep or Marine Larson
Electronics BCML-LED-30W-335GM-0002-15 Bar Clamp Mount LED Spotlight - 30W LED
- 10" Shaft - 6" Round LED Light Head (Chrome-1.5"). Bar clamp
mount LED spotlight - 30 watt LED - 10 inch shaft - 6 inch round LED light
head(-chrome-1. 5"). the larson electronics bcml-led-30w-335gm bar clamp
mount spotlight offers high light output, low profile housing. This light
Produces a very tight spot pattern, runs on 12 Volts dc, and provides a rugged
lighting solution ideal for use in marine environments, industrial and
commercial applications, Machine vision system lighting, heavy equipment
illumination, vehicle lighting and law enforcement. The bcml-led-30w-335gm LED
bar clamp mount spotlight from larson electronics Produces a 600` long light
beam with 215, 000 candlepower of bright light while drawing only 30 watts at
2. 5 amps from a 12 volt electrical system. Eight high p owered leds are
combined with high purity optics to produce a tight spot beam. This Fixture is
ideal for anyone who is looking for a tight spot light that offers outstanding
life hours of 35, 000+. these LED bar clamp mount spotlights are IP68 rated and
waterproof to three meters, sealed against intrusion by dust and dirt and
ruggedly constructed to withstand demanding environments and applications. It
is constructed of extruded ALUMINUM and feature rubber isolated mounts and
unbreakable polycarbonate lenses to provide durability and resistance to
vibrations, impacts, waves, hard rains, sand and high winds. Heat management:
heat is the single largest factor in premature LED failure and color shifting.
These LED units contain advanced drivers which use pulse WIDTH modulation to
control heat buildup rather than simple voltage regulators which are typically
harsh on sensitive electronics and can contribute to early LED failure. These
units automatically sense the temperature of each LED and adjust the energy
frequency or inch duty cycle" accordingly to maintain heat levels within
acceptable ranges. This system in essence flashes current at an extremely fast
on and off rate to each LED based upon the led's core temperature. Retail price
$610.43 New in sealed factory box.