Back to the main page Back to category Flashlights
watch details
MANKER MK34 12-XP-G3 LED 7-Mode 8000lm Cool White Flashlight
Estimated price for orientation: 180 $
Category: Flashlights
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: MANKER MPN: Does Not Apply UPC: Does not apply
Material: Aircraft-grade aluminum alloy
- Surface Treatment: Premium Type III hard-anodized anti-abrasive finish
- Emitters: 12 x XP-G3
- Color BIN: Cool white
- Maximum Output: 8000lm
- Maximum Beam Intensity: 200000cdBrightness Levels / Runtime(hour)
- Moonlight: 0.1~30lm / (2 months~5 days)
- Low: 120lm / 3hours
- Mid1: 500lm / 7.5h
- Mid2: 1000lm / 3.5h
- Hi: 2500lm / 2h
- Turbo: 8000lm
- Strobe: 8000lm- Battery: 3 x 18650(Unprotected board)(Batteries Not Included)
- Voltage: 2.8V~4.35V(Over discharge protection)
- Driver: Most efficiency constant current circuit
- Waterproof Standard: IPX-8
- Impact Resistance: 2m
- TailstandKindly note:
We recommend Sanyo 18650GA battery for your MK34.Reason:
1.The battery supply at least 20amps current.
2.The battery should not have protection board (Too long for MK34)
3. The length of positive top should be at least 1mm (There is a reverse polarity O-ring on the positive contact surface.)Notice: The above date has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 3 WAPPOWER 18650 batteries (3.7V 3200mAh) under laboratory conditions. The datea may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.
(Kindly note: Please check above demo picture)
1.When the flashlight is off, one click, access to moonlight mode (left part of the figure), one click to circle: Moonlight - Low - Medium 1 - Medium 2 - High. Long press for light off.
2. When the flashlight is off, long press to access to the mode your last use as in left part of the figure (Memory function), one click for circle. Long press for off.
3. When the flashlight is off, double click access to Turbo, one click for circle. Long press for light off.
4. When the flashlight is on, double click to switch between the two groups ( left and right part of the figure)
Side switch battery indicator:
1. Blue: More than 75%
2. Purple: 50%
3. Red: Less than 20%
Lock out:
Oneclick - Double - Triple from any mode to lock out the flashlight. (Only the battery indicator works when lock out)
Engineering Mode (Choose output level from Moonlight mode):
Long press for off and still hold on, the side button battery indicator will turn on and then quick click for 4 times to get acess to engineering mode. One click to check different level and long press to make your final choice.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | MANKER |
| MPN: | Does Not Apply | UPC: | Does not apply |
Material: Aircraft-grade aluminum alloy
- Surface Treatment: Premium Type III hard-anodized anti-abrasive finish
- Emitters: 12 x XP-G3
- Color BIN: Cool white
- Maximum Output: 8000lm
- Maximum Beam Intensity: 200000cdBrightness Levels / Runtime(hour)
- Moonlight: 0.1~30lm / (2 months~5 days)
- Low: 120lm / 3hours
- Mid1: 500lm / 7.5h
- Mid2: 1000lm / 3.5h
- Hi: 2500lm / 2h
- Turbo: 8000lm
- Strobe: 8000lm- Battery: 3 x 18650(Unprotected board)(Batteries Not Included)
- Voltage: 2.8V~4.35V(Over discharge protection)
- Driver: Most efficiency constant current circuit
- Waterproof Standard: IPX-8
- Impact Resistance: 2m
- TailstandKindly note:
We recommend Sanyo 18650GA battery for your MK34.Reason:
1.The battery supply at least 20amps current.
2.The battery should not have protection board (Too long for MK34)
3. The length of positive top should be at least 1mm (There is a reverse polarity O-ring on the positive contact surface.)Notice: The above date has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 3 WAPPOWER 18650 batteries (3.7V 3200mAh) under laboratory conditions. The datea may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.
(Kindly note: Please check above demo picture)
1.When the flashlight is off, one click, access to moonlight mode (left part of the figure), one click to circle: Moonlight - Low - Medium 1 - Medium 2 - High. Long press for light off.
2. When the flashlight is off, long press to access to the mode your last use as in left part of the figure (Memory function), one click for circle. Long press for off.
3. When the flashlight is off, double click access to Turbo, one click for circle. Long press for light off.
4. When the flashlight is on, double click to switch between the two groups ( left and right part of the figure)
Side switch battery indicator:
1. Blue: More than 75%
2. Purple: 50%
3. Red: Less than 20%
Lock out:
Oneclick - Double - Triple from any mode to lock out the flashlight. (Only the battery indicator works when lock out)
Engineering Mode (Choose output level from Moonlight mode):
Long press for off and still hold on, the side button battery indicator will turn on and then quick click for 4 times to get acess to engineering mode. One click to check different level and long press to make your final choice.
- Surface Treatment: Premium Type III hard-anodized anti-abrasive finish
- Emitters: 12 x XP-G3
- Color BIN: Cool white
- Maximum Output: 8000lm
- Maximum Beam Intensity: 200000cdBrightness Levels / Runtime(hour)
- Moonlight: 0.1~30lm / (2 months~5 days)
- Low: 120lm / 3hours
- Mid1: 500lm / 7.5h
- Mid2: 1000lm / 3.5h
- Hi: 2500lm / 2h
- Turbo: 8000lm
- Strobe: 8000lm- Battery: 3 x 18650(Unprotected board)(Batteries Not Included)
- Voltage: 2.8V~4.35V(Over discharge protection)
- Driver: Most efficiency constant current circuit
- Waterproof Standard: IPX-8
- Impact Resistance: 2m
- TailstandKindly note:
We recommend Sanyo 18650GA battery for your MK34.Reason:
1.The battery supply at least 20amps current.
2.The battery should not have protection board (Too long for MK34)
3. The length of positive top should be at least 1mm (There is a reverse polarity O-ring on the positive contact surface.)Notice: The above date has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 3 WAPPOWER 18650 batteries (3.7V 3200mAh) under laboratory conditions. The datea may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.
(Kindly note: Please check above demo picture)
1.When the flashlight is off, one click, access to moonlight mode (left part of the figure), one click to circle: Moonlight - Low - Medium 1 - Medium 2 - High. Long press for light off.
2. When the flashlight is off, long press to access to the mode your last use as in left part of the figure (Memory function), one click for circle. Long press for off.
3. When the flashlight is off, double click access to Turbo, one click for circle. Long press for light off.
4. When the flashlight is on, double click to switch between the two groups ( left and right part of the figure)
Side switch battery indicator:
1. Blue: More than 75%
2. Purple: 50%
3. Red: Less than 20%
Lock out:
Oneclick - Double - Triple from any mode to lock out the flashlight. (Only the battery indicator works when lock out)
Engineering Mode (Choose output level from Moonlight mode):
Long press for off and still hold on, the side button battery indicator will turn on and then quick click for 4 times to get acess to engineering mode. One click to check different level and long press to make your final choice.