Warm mat with insulation for cold weather The mats of SEA TO SUMMIT are not only very light, but compared to other mats also really comfortable. The reason for this is the core technology,   the Air jump Cells ™. Instead of a typical partition construction, are   STS-sleeping mats with a spot-welded construction from each other connected chambers (Air jump Cells ™) provided, which form a large matrix. This works almost like pocket sprung mattresses - each chamber deforms independently, so that the Maratze body shape adapts optimally. This makes the mats softer and more comfortable, because a larger   Body contact surface   and a more balanced pressure distribution arises. Thanks to the multifunctional valve can be the mat quickly and easily inflate, regulate the hardness and   within a few seconds can be the air remove and fold the mat.   At this   Variant with Thermal Insulation Technology are the chambers with Thermolite® insulation filled, which allows a high CLO with low weight. The top of the mat is provided from the inside with a Exkin Platinum® layer, a super lightweight, noiseless material with thin, metallic surface. This Exkin Platinum® thermal technology reflects heat radiation emitted back to the user. The Comfort Plus mats are in the   Double-Layer technology produced. This construction has double layers of high-resolution cells which are inflated independently. The upper layer is adapted to the personal convenience-being, while the lower layer is aufgebalsen high pressure to compensate for uneven terrain. A further advantage is that   one in case of a puncture yet a further layer functions Tüchtig is.  With stuff sack, repair kit and spare valve.