Back to the main page Back to category Sleeping Bags
watch details
Original Russian SPLAV Eulin Fiber Sleeping Bag "Combat3" Extreme: -17°C 1500mm
Estimated price for orientation: 179 $
Category: Sleeping Bags
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Splav Insulation Type: Synthetic Country/Region of Manufacture: Russian Federation MPN: Does Not Apply Season: Cold Weather (+10F & below) Type: Mummy Mattress Size: Single Shell Material: Polyester Lining Material: Polyester Features: Compression Straps
Brand new condition of original Russian item!
Manufacturer: SPLAV Ltd., RussiaSleeping bag with integrated mosquito net for the faceZipper located in the top center of the sleeping bag, 2/3 of its length. Convenient and rapid opening with either handTwo-way zipper covered with top and bottom insulated slats. The top strap fastens with Velcro along the entire length and has a pocket for mosquito netsMosquito net if necessary, fastened with a zipper around the perimeter of the neckCutout for the face has the minimum required size and provided with a drawcord, allowing you to minimize heat loss. Inside additionally there is a drawcord around the body, analogous to cervical packInternal pocket for small items with zipCompression stuff sack includedAttention! Long-term storage in a compressed form is not recommended. Packing in compression bag should be made arbitrarily crushing the sleeping bag, not gently rolling, as this minimal deformation of the insulationUse temperature:Comfort: +4... -1° CExtreme: -17° CDimensions and weight:Dimensions: 205×75×50 cm (80 x 30 x 20 inches)
Total weight: 1.95 kg
Minimum weight: 1,72 kg
Dimensions in Packed / compressed form: ∅22×37/28 cmDimensions: 240×85×60 cm (95 x 33 x 23 inches)
Total weight: 2,45 kg
Minimum weight: 2,31 kg
Dimensions in Packed / compressed form: ∅24×40/31 cmMaterials:Outer fabric: Polyester Honeycomb 70D /190 T W/R CireThe outer fabric of the lower part of sleeping bag: Polyester Honeycomb 70D /190 T W/R Cire PU 1500 mmInner fabric: Polyester Silk Touch 75D/100D/190TInsulation: Eulin FiberThe density of insulation: 300 g/m2We strongly recommend to use washing machines with front-loading, in case, if You are the owner machine with top loading, it is recommended to wash the clothes and equipment in a special mesh Laundry bag to protect against possible damage to the parts of the drum washing machine. Before washing it is necessary to close all zipper and velcro closure and completely relax all the regulations. If the upper fabric membrane, then wash the cloth lining to the outside (inside-out).Wash in delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycle to ensure all detergent residues are removed from the fabric and insulation) and spin at medium speed.It is permissible to use a drying drum at a moderate temperature (40-60°C) for 30-40 minutes or until dry, if the upper fabric membrane, the product is better to dry the lining out (turned inside out). It is possible to dry the product in limbo lining out.To remove stubborn stains before washing, you can handle the pollution with special composition, such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes.Keep clothes and gear with synthetic insulation is better in the expanded (not compressed) state.How to restore the DWR treatment on insulated clothing or equipmentDWR is a polymer applied to the surface of fabric to impart water-repellent properties. DWR treatment is not eternal. In the operation of the product and after a number of washings the DWR effectiveness is reduced. If drops of water have ceased to roll with the surface of the fabric and moisten the fabric even after washing, it is time to restore the splash treatment.We recommend you to use special formulations for restoring spray treatment tissue in the form of a spray, or pour in the washing machine, such as Grangers Performance Clothing Repel, or Repel, or Nikwax TX.Direct Wash-In or Spray-On.First, you need to wash the product in accordance with the recommendations in the wash, then use the selected material to restore spray processing, spraying it directly on the front side of the product while it's still wet, or by starting a second washing cycle, pre-Gulf required amount of the composition of the wash-in in the washing machine.Ought to follow exactly the manufacturer's instructions means for recovering the spray treatment given on the package.A means to restore DWR require the thermoactivation, so it is best to dry the treated clothing and equipment in a drying drum or a drying Cabinet at a moderate temperature (40-60°C) for 40-50 minutes or until dry.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Splav |
| Insulation Type: | Synthetic | Country/Region of Manufacture: | Russian Federation |
| MPN: | Does Not Apply | Season: | Cold Weather (+10F & below) |
| Type: | Mummy | Mattress Size: | Single |
| Shell Material: | Polyester | Lining Material: | Polyester |
| Features: | Compression Straps |
Brand new condition of original Russian item!
Manufacturer: SPLAV Ltd., RussiaSleeping bag with integrated mosquito net for the faceZipper located in the top center of the sleeping bag, 2/3 of its length. Convenient and rapid opening with either handTwo-way zipper covered with top and bottom insulated slats. The top strap fastens with Velcro along the entire length and has a pocket for mosquito netsMosquito net if necessary, fastened with a zipper around the perimeter of the neckCutout for the face has the minimum required size and provided with a drawcord, allowing you to minimize heat loss. Inside additionally there is a drawcord around the body, analogous to cervical packInternal pocket for small items with zipCompression stuff sack includedAttention! Long-term storage in a compressed form is not recommended. Packing in compression bag should be made arbitrarily crushing the sleeping bag, not gently rolling, as this minimal deformation of the insulationUse temperature:Comfort: +4... -1° CExtreme: -17° CDimensions and weight:Dimensions: 205×75×50 cm (80 x 30 x 20 inches)
Total weight: 1.95 kg
Minimum weight: 1,72 kg
Dimensions in Packed / compressed form: ∅22×37/28 cmDimensions: 240×85×60 cm (95 x 33 x 23 inches)
Total weight: 2,45 kg
Minimum weight: 2,31 kg
Dimensions in Packed / compressed form: ∅24×40/31 cmMaterials:Outer fabric: Polyester Honeycomb 70D /190 T W/R CireThe outer fabric of the lower part of sleeping bag: Polyester Honeycomb 70D /190 T W/R Cire PU 1500 mmInner fabric: Polyester Silk Touch 75D/100D/190TInsulation: Eulin FiberThe density of insulation: 300 g/m2We strongly recommend to use washing machines with front-loading, in case, if You are the owner machine with top loading, it is recommended to wash the clothes and equipment in a special mesh Laundry bag to protect against possible damage to the parts of the drum washing machine. Before washing it is necessary to close all zipper and velcro closure and completely relax all the regulations. If the upper fabric membrane, then wash the cloth lining to the outside (inside-out).Wash in delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycle to ensure all detergent residues are removed from the fabric and insulation) and spin at medium speed.It is permissible to use a drying drum at a moderate temperature (40-60°C) for 30-40 minutes or until dry, if the upper fabric membrane, the product is better to dry the lining out (turned inside out). It is possible to dry the product in limbo lining out.To remove stubborn stains before washing, you can handle the pollution with special composition, such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes.Keep clothes and gear with synthetic insulation is better in the expanded (not compressed) state.How to restore the DWR treatment on insulated clothing or equipmentDWR is a polymer applied to the surface of fabric to impart water-repellent properties. DWR treatment is not eternal. In the operation of the product and after a number of washings the DWR effectiveness is reduced. If drops of water have ceased to roll with the surface of the fabric and moisten the fabric even after washing, it is time to restore the splash treatment.We recommend you to use special formulations for restoring spray treatment tissue in the form of a spray, or pour in the washing machine, such as Grangers Performance Clothing Repel, or Repel, or Nikwax TX.Direct Wash-In or Spray-On.First, you need to wash the product in accordance with the recommendations in the wash, then use the selected material to restore spray processing, spraying it directly on the front side of the product while it's still wet, or by starting a second washing cycle, pre-Gulf required amount of the composition of the wash-in in the washing machine.Ought to follow exactly the manufacturer's instructions means for recovering the spray treatment given on the package.A means to restore DWR require the thermoactivation, so it is best to dry the treated clothing and equipment in a drying drum or a drying Cabinet at a moderate temperature (40-60°C) for 40-50 minutes or until dry.
Manufacturer: SPLAV Ltd., RussiaSleeping bag with integrated mosquito net for the faceZipper located in the top center of the sleeping bag, 2/3 of its length. Convenient and rapid opening with either handTwo-way zipper covered with top and bottom insulated slats. The top strap fastens with Velcro along the entire length and has a pocket for mosquito netsMosquito net if necessary, fastened with a zipper around the perimeter of the neckCutout for the face has the minimum required size and provided with a drawcord, allowing you to minimize heat loss. Inside additionally there is a drawcord around the body, analogous to cervical packInternal pocket for small items with zipCompression stuff sack includedAttention! Long-term storage in a compressed form is not recommended. Packing in compression bag should be made arbitrarily crushing the sleeping bag, not gently rolling, as this minimal deformation of the insulationUse temperature:Comfort: +4... -1° CExtreme: -17° CDimensions and weight:Dimensions: 205×75×50 cm (80 x 30 x 20 inches)
Total weight: 1.95 kg
Minimum weight: 1,72 kg
Dimensions in Packed / compressed form: ∅22×37/28 cmDimensions: 240×85×60 cm (95 x 33 x 23 inches)
Total weight: 2,45 kg
Minimum weight: 2,31 kg
Dimensions in Packed / compressed form: ∅24×40/31 cmMaterials:Outer fabric: Polyester Honeycomb 70D /190 T W/R CireThe outer fabric of the lower part of sleeping bag: Polyester Honeycomb 70D /190 T W/R Cire PU 1500 mmInner fabric: Polyester Silk Touch 75D/100D/190TInsulation: Eulin FiberThe density of insulation: 300 g/m2We strongly recommend to use washing machines with front-loading, in case, if You are the owner machine with top loading, it is recommended to wash the clothes and equipment in a special mesh Laundry bag to protect against possible damage to the parts of the drum washing machine. Before washing it is necessary to close all zipper and velcro closure and completely relax all the regulations. If the upper fabric membrane, then wash the cloth lining to the outside (inside-out).Wash in delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycle to ensure all detergent residues are removed from the fabric and insulation) and spin at medium speed.It is permissible to use a drying drum at a moderate temperature (40-60°C) for 30-40 minutes or until dry, if the upper fabric membrane, the product is better to dry the lining out (turned inside out). It is possible to dry the product in limbo lining out.To remove stubborn stains before washing, you can handle the pollution with special composition, such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes.Keep clothes and gear with synthetic insulation is better in the expanded (not compressed) state.How to restore the DWR treatment on insulated clothing or equipmentDWR is a polymer applied to the surface of fabric to impart water-repellent properties. DWR treatment is not eternal. In the operation of the product and after a number of washings the DWR effectiveness is reduced. If drops of water have ceased to roll with the surface of the fabric and moisten the fabric even after washing, it is time to restore the splash treatment.We recommend you to use special formulations for restoring spray treatment tissue in the form of a spray, or pour in the washing machine, such as Grangers Performance Clothing Repel, or Repel, or Nikwax TX.Direct Wash-In or Spray-On.First, you need to wash the product in accordance with the recommendations in the wash, then use the selected material to restore spray processing, spraying it directly on the front side of the product while it's still wet, or by starting a second washing cycle, pre-Gulf required amount of the composition of the wash-in in the washing machine.Ought to follow exactly the manufacturer's instructions means for recovering the spray treatment given on the package.A means to restore DWR require the thermoactivation, so it is best to dry the treated clothing and equipment in a drying drum or a drying Cabinet at a moderate temperature (40-60°C) for 40-50 minutes or until dry.