270 $
Description
| Brand: | Manchester | Model: | 3.3 gallon |
This brand new propane tank is manufactured by the OEM Supplier Manchester Tank, It is a direct bolt in replacement for all Volkswagen camper applications 80-91. Will also fit 68-79 bus if you fabricate a mounting bracket. Comes complete with auto shut off fill valve. Regulator and regulator covers not included, but may be ordered separately if needed. Compliant with all current Federal D.O.T. Regulations.Features
Includes internal auto-stop valve & shut-off valve, Skid plate. Increased 3.3 gallon capacity.
I bought it a couple of month ago to Rockymountainwesty for $370. I did installed it for 3 days in my camper without using it or moving my van. I removed it because I changed my mind and decided to go solar only so its yours for $270 + shipping. It is completely new minus a few very minor scratch while installing . It also lost a little bit of paint at one end (see picture left side) because I may have pushed it on the floor and I scratched the paint. a little paint spray would take care of it. Be sure to put something on the floor so you don't damage the paint.
I already seals the regulator with rectorseal 5, I am including the brass T-fitting which goes to the stove and fridge
Installation tips:
- Due to the modern design of the regulator, you will most likely NOT have to cut and re-flare your lines for installation.
- There is a brass two-into-one T-fitting into which your copper lines thread. You'll need to keep this T-fitting and reuse it when installing your new tank.
- When removing the lines and the splitter from your old regulator, you can utilize a pipe plug to stop the flow of LP before removing the old tank.
- We recommend having your new tank professionally purged before the first filling. Please contact a local RV shop for purging.
- Likewise, any leftover LP in your old tank should be professionally purged. Bus owners: Installation of this tank requires an adapter bracket kit, sold separately below.
WARNING: When attaching fittings to the regulator, be sure to support the regulator with a second wrench – at the end you are attaching the fitting. DO NOT hold the opposite end of the regulator while torqueing down the fitting as this can crack the casing of the regulator. (see additional image)For installation , please go to gowesty to know more.Thanks
Includes internal auto-stop valve & shut-off valve, Skid plate. Increased 3.3 gallon capacity.
I bought it a couple of month ago to Rockymountainwesty for $370. I did installed it for 3 days in my camper without using it or moving my van. I removed it because I changed my mind and decided to go solar only so its yours for $270 + shipping. It is completely new minus a few very minor scratch while installing . It also lost a little bit of paint at one end (see picture left side) because I may have pushed it on the floor and I scratched the paint. a little paint spray would take care of it. Be sure to put something on the floor so you don't damage the paint.
I already seals the regulator with rectorseal 5, I am including the brass T-fitting which goes to the stove and fridge
Installation tips:
- Due to the modern design of the regulator, you will most likely NOT have to cut and re-flare your lines for installation.
- There is a brass two-into-one T-fitting into which your copper lines thread. You'll need to keep this T-fitting and reuse it when installing your new tank.
- When removing the lines and the splitter from your old regulator, you can utilize a pipe plug to stop the flow of LP before removing the old tank.
- We recommend having your new tank professionally purged before the first filling. Please contact a local RV shop for purging.
- Likewise, any leftover LP in your old tank should be professionally purged. Bus owners: Installation of this tank requires an adapter bracket kit, sold separately below.
WARNING: When attaching fittings to the regulator, be sure to support the regulator with a second wrench – at the end you are attaching the fitting. DO NOT hold the opposite end of the regulator while torqueing down the fitting as this can crack the casing of the regulator. (see additional image)For installation , please go to gowesty to know more.Thanks